Eightpins H01 - Ergonomic Aspects; Before the Assembly

6
EIGHTPINS
The product may only be used by a person who has no physical restrictions and is familiar with the operating instructions.
The use of the product is only permitted by a person sitting on the bike.
Ergonomic aspects:
TheergonomicspointwasconsideredtakingDINENISO12100:2011intoaccount.Sincethetelescopicseatposto󰀨eredbyEightpinsisonlypart
of the bicycle, ergonomic considerations cannot be considered.
Furthermore, it is not a work tool, but a leisure and sports device.
For further questions, please contact your dealer, supplier or manufacturer of your bike.
Specialinformationonhandlinglubricantsandthedangerfromnitrogenwithwhichthegasspringislled,
are also available in the operating instructions.
These can be found at the end of these operating instructions.
Before the assembly
The post-pin mounting interface in the frame contains an adjustment screw on the right side of the frame for vertical alignment of the seatpost.
This screw is already set at the factory and glued with a detachable screw glue.
If the adjusting screw is not included in the frame or adjusted correctly, contact the frame supplier.