32
Exchangeofthehydraulicgasspring
Required tools
Removal of the hydraulic gas spring
Before dismantling the hydraulic gas spring, clean the entire cartridge and
remove grease to enable clean work..
Clamp the cartridge with a vice on the mounting interface on the left and right side
.
Achtung! Nur mit Schonbacken klemmen um Beschädigungen oder Verformungen
zu vermeiden. Die Schraubstock nur ganz leicht fest spannen.
-23mm open end wrench/or Adjustable wrench
-2mm Inbus Stiftschlüssel
-Loctite 243 medium strength screw lock
-Loctite 270 high-strength threadlocker
-Vice
-Protective jaws for vice
To Next Page
Loading...