Eightpins H01 - Compatibilities

8
EIGHTPINS
Compatibilities
TheintegratedEightpinsvariableseatpostisexclusivelydesignedforframeswithaPostpininterface.Onecannotretrotthisinterfacetoabicycle
frame. Refer to your local bike shop in case you are in doubt.
Currently released frames:
Liteville (6X- Size sheme) Ghost (6X- Size sheme) Rowild (4X- Size sheme) Bulls (4X- Size sheme)
-H-3 MK3 -LectorSupert -750er Baureihe -Sonic Evo EN Alu
-301 MK15 -Sonic Evo Carbon
-4-One Gravel MK1
-301CE MK1
Attention: Eightpins decisively advices its customers not to modify a frame in any way, as this
can weaken the frame, cause crashes and lead to severe injuries including death.
Eightpin‘sseatpostsaredividedintotwodi󰀨erentsizeschemes.Thereisasizeschemewith4sizes:S,M,LandXLanda
size scheme with 6 sizes: XS, S, M, L, XL, XXL. The size to use depends entirely on the frame size.
UseonlyEightpinscartridgesofthecorrectsizefortheappropriateframesize.(Example:6X-Lcartridgetsintoaframe
with 6-fold size scheme with the size L)
The bushing tube length is selected so that it corresponds to the minimum insertion depth of the seattube in the frame. All
bending forces are transferred to the frame via the bushing tube. When assembling or exchanging the bushing tube, the
correct length must be used. The respective length can be found in the table under the column bushing tube.
It is also important to pay attention to the compatibility of the seatpost tube lengths. The table contains all possible combi-
nations. The corresponding adjustment ranges can also be found in the table. The values refer to the distance between the
bottom bracket and the upper edge of the saddle. Included is a saddle with a height of 4cm.
ATTENTION! Only the intended and compatible seat post sizes, strokes and bushing tube
lengths specied by the bike manufacturer may be used.
HP
LP