Eizo DuraVision FDF4627W-IP

20
3. After completing the setting, select “Apply” and press .
The setting complete screen is displayed. Press to select “OK”.
4. Select “Next” and press .
The network camera automatic discovery screen is displayed.
6.
Automatically discover network cameras.
1. Select “Camera Discovery”, then press .
2. Select the camera type using
or
, then press .
2
3. Check that “Start” is selected and press .
The user authentication screen is displayed.
4
5
4. Enter the “Username” and “Password” specied in the network camera.
The following values are entered as the default settings. Change the settings if necessary.
Please contact your administrator for the username and password.
- Username: “admin”
- Password: “12345”