Eizo Foris FS2333 - To Reset All Adjustments to the Default Settings

32
Chapter3SettingMonitor
●
To reset all adjustments to the default settings
This function resets all adjustments to the default settings.
Attention
• The reset operation cannot return the authentication method for HDMI signal input (“3-8. Changing the authentication
method for HDMI signal input” (page 31)) and the exiting method from the power saving mode (“To change the exiting
method from the power saving mode” (page 37)) to the default setting.
Procedure
1. Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “Reset” in the “Monitor Settings” menu, and press
.
3. Select “Yes” with
or .
4. Press
.
All adjustments revert to the default settings.