Eizo Foris FS2333 - Controls and Functions

8
Chapter1Introduction
1-2. Controls and Functions
Monitor
Settingmenu
*1
13
14
15
1 2 3 4 5 6 117 8 9 12
16
10
1. Auto EcoView sensor
Detectsambientbrightness.AutoEcoViewfunction(page38),EcoViewOptimizerfunction
(page38).
2. Remote control
detector
Receivesthesignalfromtheremotecontrol.
3.
button
Switchesinputsignalsfordisplay(page40).
PC1(DVI)→PC2(D-SUB)→HDMI1→HDMI2
4.
/ button Displaysthevolumeadjustmentmenutovolumeupordown.
5.
button Turnsthepoweronoroff.
6. Power indicator
Indicatesthemonitor’soperationstatus.
Blue: Operating
Orange: Powersavingmode
Red Poweroff
OFF: Mainpoweroff
7. Main power switch Turnsthemainpoweronoroff.
8. Power connector Connectsthepowercord.
9. Input signal connector
(Left:HDMIconnector×2(HDMI1,HDMI2)/Center:DVI-Dconnector/
Right:D-Submini15-pinconnector)
ConnectsexternaldevicessuchasaPC.
10. Line input connector
(Stereominijack)
ConnectsexternaldevicessuchasaPC.
11. Line output connector
(Stereominijack)
Connectsaspeakerwithbuilt-inamplier(page41).
12. Headphone jack Connectstheheadphones.
13. Speaker Outputsaudiosource.
14. Security lock slot ComplieswithKensington’sMicroSaversecuritysystem.
15. Stand
*2
Adjuststheheightandangle(tiltandswivel)ofthemonitor.
16. Handle
Handleusedfortransportation
Attention
• Firmly grasp and hold the monitor by the bottom while grabbing the handle, and carefully
convey the monitor so as not to drop it.
*1 See “Basic operation of the Setting menu” (page 11) for how to use.
*2 An optional arm (or an optional stand) can be attached by removing the stand (see “8-1. How to Attach the Optional Arm”
(page 46)).