Eizo Foris FS2333 - Before Using Remote Control

9
Chapter1Introduction
Remote Control
1. PC/HDMI
Switchesinputsignalsfordisplay.
• PC:PC1(DVI)←→PC2(D-SUB)
• HDMI:HDMI1←→HDMI2
2. MODE Changesthecolormode.
3. MENU Displays/ExitstheSettingmenu.
4. EcoView Displays/Exits“EcoViewMenu”.
5. SIZE Changesthescreensize.
6. Smart Displays/Exitsthe“SmartFunctions”menu.
7. POWER Turnsthepoweronoroff.
8. OFF TIMER Setsthetimeuntilthemonitorpower-off.
9.
/ / /
• Choosesandincreases/decreasesadjustmentsettings
foradvancedadjustmentusingtheSettingmenu.
•
/ :Displaysthebrightnessadjustmentmenu
(page17).
10. ENTER
Determinesanitemonthemenuscreen,andsaves
valuesadjusted.
11. RETURN Returnstothepreviousmenuinmenuoperation.
12. VOLUME +/- Adjuststhevolume.
13. MUTE Mutessoundtemporarily.
●
Before Using Remote Control
How to install battery
1. On the back of the remote control, slide the battery cover off
in the direction of an arrow.
2. Insert a battery with the positive side up. (Battery model
number: CR2025)
3. Reattach the cover.
Receivable Range of Remote Control
Use the remote control inside of the range as below.
5m
5m
20°
20°
7m
5m
30°
30°
7m
5m
12
7
8
11
13
1
2
4
6
5
9
10
3