21
Chapter 2 Adjusting Screens
●
To adjust gain
The brightness of each color component red, green, and blue is called “Gain”. You can change the
hue of “white” by adjusting gain.
Adjustable range
0 to 100
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Advanced Settings” in the “Color” menu, and press
.
3. Choose “Gain” in the “Advanced Settings” menu, and press
.
The “Gain” menu appears.
4. Adjust gain with or for each of red, green, and blue.
5. Press
to exit the adjustment.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The value of gain changes with that of color temperature.
• When gain is changed, the color temperature is changed to “Off”.
●
To reduce noise
It is possible to reduce block noise (mosaic pattern) that is experienced when displaying compressed
videos.
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Advanced Settings” in the “Color” menu, and press
.
3. Choose “Noise Reduction” in the “Advanced Settings” menu, and press
.
The “Noise Reduction” menu appears.
4. Select “Enable” or “Disable” with or .
5. Press
to exit the adjustment.
Attention
• When “Noise Reduction” is set to “Enable,” details of the image can be lost.
To Next Page
Loading...
