11
Operating parameters
from 1 minute to 11 hours and 59 minutes or “INFINITE” time (∞)
from 30°C to 270°C (from 86°F to 518°F)
from 01°C to 99°C (from 33°F to 210°F)
from off to 100% with 10% step
3.3 PREHEATING SETTING
From the “COOKING PARAMETERS” screen (Fig.3), when “phase 1” is selected, touching the symbol
displays the “ADDITIONAL FUNCTIONS” screen (Fig.4). By touching the value of the symbol, it is
possible to set the temperature increase with respect to the temperature set in “phase 1” using the
keyboard that appears (Fig.5); touch the symbol to confirm.
The PREHEATING function must not exceed 270°C.
To deactivate the PREHEATING function, the value 0°C must be set.
For example, if a cooking temperature of 180°C (“phase 1”) and a PREHEATING temperature of 50°C is
set, a temperature value of 230°C will be reached inside the cooking chamber.
During the preheating phase, the “PREHEATING IN PROGRESS” screen (Fig.6) appears, which displays the
actual temperature and the preheating temperature set.
An acoustic signal (“beep”) and the symbol warns that this temperature has been reached, which is
maintained while the oven door is closed.
Open the door (the beeping stops) and introduce the product to be cooked. Close the door: the cooking
cycle starts automatically.
Fig.3 Fig.4 Fig.5 Fig.6
To Next Page
Loading...
