EKE-Electronics EKE-Trainnet MVB - HELP Command; Debugging Commands; BA - Bus Administrator

Troubleshooting with software
26
5.5 HELP command
SYNTAX
 HELP
 ?
EXPLANATION
Use this command to display all the available commands.
5.6 Debugging commands
When you suspect data transmission errors in the Multifunction Vehicle Bus, you can
use debugging commands to determine the nature of the error. The debugging
commands include
 BA
 CHECK_LINE (D)
 CTRL
 GET_STAT
 HELP
 IN
 MSGR (D)
 MSGS (D)
 OUT (D)
 QUIT (D)
 REC (D)
 START (D)
The following sections describe these commands in alphabetical order.
All values are displayed in hexadecimal notation, and all parameters must
be entered in hex format.
5.6.1 BA - Bus Administrator
SYNTAX
BA