EKE-Electronics EKE-Trainnet MVB - Appendix A: Technical Specifications

49
Appendix A:
Technical Specifications
This appendix includes technical specifications for the MVB module.
Mechanical specifications
The following table specifies the mechanical details of the MVB module.
Table A.1: PCB and front panel dimensions
Free space required in front of the module: 75 mm
Pin order and connector specifications
The following tables specify the connector details for the MVB module.
M1 - MVB EMD Connector_1
Connector is standard 9 pin sub D-type, male.
Table A.2: Pin order, connector M1
PCB Euro 1
Height, maximum 100 mm
Depth, maximum 160 mm
Front panel
Height, maximum 128.5 mm (3 U)
Width, maximum 20.32 mm (4 TE)
Pin Signal Description
1 A.Data_P Positive wire Line_A
2 A.Data_N Negative wire Line_A
3 Not Connected
4 B.Data_P Positive wire Line_B
5 B.Data_N Negative wire Line_B