Troubleshooting with software
48
EXPLANATION
Use this command to display a list of software identification details. Notice that you
need to check hardware version and modification from the physical module. For more
information on module identification, see page 4.
The following information is displayed
dbg>ver
Module name: MVB
Baseline version: B010
Project options: P0000.000
Module FPGA: A1640-02
Module S/N:
When you start working with the WTB module, always check the
information displayed by this command. Compare it with reference
information provided in customer/project/ fleet-specific software release
notes.
Project options
P0000 is the field for the project number. P0000 is the default
version.
000 is the patch release field.
Module FPGA The version of the FPGA content is equally important for the module
functionality as the firmware version.
Module S/N Module serial number given in production.
To Next Page
Loading...