21
5: Troubleshooting with
software
This chapter includes instructions for troubleshooting the EKE-Trainnet
®
MVB module
with the diagnostics functions included in the module’s firmware.
The following topics are covered in this chapter:
Finding the command you need
MVB configuration
Firmware loading
Getting started with troubleshooting
Debugging commands
Memory commands
Software development commands
5.1 Finding the command you need
The following table lists the pages on which each command is explained.
Table 5.1: Diagnostics commands included in the MVB module firmware
COMMAND PAGE COMMAND PAGE
ADDR 37 MSGR 33
AS 43 MSGS 34
BA 26 MVB_MODE 44
CHECK_LINE 27 OUT 35
CS 44 QUIT 35
CTRL 27 REC 36
GET_STAT 28 RESET 47
HELP 26 RM 39
IN 30 RP 40
LOP 45 SM 41
LOS 46 SP 41
To Next Page
Loading...