Troubleshooting with software
30
hardware_name MVBC02C-EMD-A1640-02
software_name MVB.B010.P0000.000
t_ignore 55 us
line_A_errors 00000000
line_B_errors 00000000
Counters
heartbeat (bp) 00001B39
macro cycles 00000000
all frames 00049AB3
erroneous frames 00000000
Asic re-started 00000000
DC/DC-conv. errors 00000000
Bus
status Ok
lines red,A=1,B=0,active line A
MVB_Devices
address status
-----------------------------
0064 5780 BA
00CC 1780
dbg>
5.6.5 IN
SYNTAX
IN addr8
addr8 = 8-bit address of an input port that contains a register
EXPLANATION
Use this command to display the contents of an input port, that is, a register.
The following table lists the registers available on the MVB module. The bit level
information can be useful for maintenance purposes.
To Next Page
Loading...