EKOM DK50-10 - Technical Data

DK50-10
NP-DK50-10-16_01-2022-MD - 10 - 01/2022
TECHNICAL DATA
Compressors are designed for dry and ventilated indoor environments with the following conditions:
Temperature
+5°C to +40°C
Relative humidity
max. 70%
Tab.1
5 – 7 bar
DK50-10 Z
DK50-10 S
DK50-10 Z/M
DK50-10 S/M
Rated voltage /
frequency (*)
V / Hz
230 /
50/60
115 /
60
230 /
50/60
115 /
60
230 /
50/60
115 /
60
230 /
50/60
115 / 60
Performance at 5 bar
Lit.min-1
75/85
85
75/85
85
58/68
68
58/68
68
Working pressure (**)
bar
5.0 – 7.0
5.0 – 7.0
5.0 – 7.0
5.0 – 7.0
Rated current
A
3.8/4.8
8.9
3.8/4.8
8.9
4.1/5.1
9.1
4.1/5.1
9.1
Motor power
kW
0.55
0.55
0.55
0.55
Air tank volume
Lit.
10
10
10
10
Air quality – filtration
m
-
-
0.1
0.1
Maximum operating
pressure of safety valve
bar
8.0
8.0
8.0
8.0
Noise level at 5 bar
LpfA
[dB]
≤64/≤66
≤66
≤46/≤49
≤49
≤65/≤67
≤67
≤49/≤52
≤52
Duty cycle
S1-100%
S1-100%
S1-100%
S1-100%
PDP - drying
performance at 7 bar
-
-
 +3°C
 +3°C
Time to fill air tank from
0 to 6 bar
s
50/44
44
50/44
44
70/60
60
70/60
60
Dimensions (net)
w x d x h
mm
485x350x553
580x440x655
544x350x553
649x440x655
Net weight (***)
kg
38
53
44
61
Classification under EN 60601-1
Class I.
Notes:
(*) When ordering, state the version of the compressor
(**) For other range of pressure:consult with the supplier
(***) Information about the weight is for informative purposes only and applies to the product without any
additional accessories.
Dependence of compressor output on working pressure