How to troubleshoot a noisy (knocking, metal noises) EKOM Compressor?
If your EKOM Compressor is making knocking or metallic noises, it could be due to a damaged piston bearing or a bearing in the motor; in this case, replace the damaged bearing. Another potential cause is a loose or cracked belt of the air pump hanger, which would require replacing the damaged hanger.
Why is water coming out of the outlets of my EKOM Compressor, and how do I stop it?
If water is coming out of the outlets of your EKOM Compressor, it is likely due to a dirty water trap in the filter and filter regulator. Clean or replace the water trap to resolve this issue.
General| Number of cylinders | 2 |
|---|---|
| Voltage | 230 V / 50 Hz |
| Air tank volume | 50 liters |
| Max Pressure | 8 bar |
| Type | Oil-free, silent compressor |
Describes the EKOM DK50 DS medical air compressor's function.
Highlights the importance of the manual for safe operation and user duties.
Explains product markings, including CE compliance.
Details general and specific warnings for safe operation.
Provides essential safety measures for equipment operation and user protection.
Outlines critical safety precautions for electrical connections and grounding.
Illustrates and explains important symbols used in the manual and on the product.
Specifies the intended environment and conditions for compressor operation.
Provides guidelines for safely storing and transporting the compressor.
Lists and briefly describes the various components and indicators of the DK50 DS compressor.
Presents detailed technical specifications, dimensions, and performance data in a tabular format.
Explains how to correct FAD efficiency based on atmospheric elevation.
Guides through the initial setup, installation, and first-time use of the compressor.
Details removal of stabilizers and air/electrical connection procedures.
Covers initial startup checks, operational modes, and available accessories.
Defines personnel roles and procedures for switching on and running the compressor.
Explains compressor modes, LED indicators, and alarm functions.
Describes methods for cleaning filters and the compressor unit.
Outlines procedures for warranty repairs and authorized service.
Provides steps for safely removing the compressor covers for maintenance.
Details recommended maintenance tasks and their intervals.
Explains service interval signalization and the contents of service kits.
Lists replacement parts and procedures for checking the safety valve.
Instructions for replacing filter elements and cleaning the pressure regulator.
Covers output testing, pressure adjustment, and component replacement.
Details procedures for electronics maintenance, including circuit board replacement.
Explains entering operating hours and the functions of SMART electronics modes.
Covers physical unit conversion and operating mode functions for 230V electronics.
Explains LED signals and how to use the service display for diagnostics.
Describes display readings, status indicators, and shutdown/disposal procedures.
Addresses problems related to the compressor failing to start.
Troubleshooting for DRYING indicator, pressure, and temperature alarms.
Diagnosing compressor noise, water output, and general malfunctions.
Lists part numbers for air intake filters and filtration inserts.
Details part numbers for fuses, insertion, and suction filters.
Presents the electrical schematic showing component connections.
Illustrates the pneumatic circuit and component layout.
To Next Page
