Clicking ‘Connect Gauge’ starts
t h e E l c o M a s t e r ™ G a u g e
Connect Wizard.
T h e E l c o M a s t e r ™ d a t a
management software allows
users to download readings from
a wide range of Elcometer
inspection gauges.
Measurements such as surface
profile, surface cleanliness,
temperature, dewpoint, delta T,
gloss, material thickness and dry
film thickness can all be
downloaded, stored and reported
using the ElcoMaster™ software.
These instructions will inform the
user how to download data from
an Elcometer 456 coating
thickness gauge. All appropriate
Elcometer gauges can be
downloaded in a similar way.
Ÿ Select the Dry Film Thickness
tab and press ‘Next >’
ElcoMaster™ supports the new
Elcometer 456 (identified in the
software as Elcometer 456/4)
and the Elcometer 456 Mk 3
(Elcometer 456/3).
Ÿ Select the Elcometer 456/4
tab and press ‘Next>’
Connecting an Elcometer gauge to ElcoMaster™ (BST)
In order to download any gauge readings from the Elcometer 456 the
user must first ‘Connect the gauge’ by clicking the ‘Connect Gauge’
button on the Download action tab.
www.elcometer.com
41
To Next Page
Loading...
