Ÿ Live Gauge Readings (BST)
ElcoMaster™ allows users to transfer data from a gauge as the
readings are taken, to be stored in a batch within ElcoMaster™.
Live gauge readings can be recorded via Bluetooth (ST) or USB
(BST) connections
Once the gauge has been connected
to ElcoMaster™ (see pages 41-43),
switch on your gauge and click the
‘Live Readings’ button on the View
Action Tab
Ÿ Select the appropriate batch (or
create a new batch) for the
readings to be recorded into
ElcoMaster™ will now open up the
Live Readings display, and ask the
user to ‘ Connect Gauge’
Ÿ Click on the Connect Gauge
Ÿ Select a gauge from the list
Ÿ Select the relevant connection
method ( i f m o r e than o n e
connection method has been set
up (see pages 41-43)
ElcoMaster™ will then link with the
selected gauge and, when ready
display the gauge information within
the Live Readings window.
Ÿ At any time the user can select a
different batch to change where
the next reading is taken.
Ÿ Click the button or switch
of the gauge to disconnect
To Next Page
Loading...
