16 Installation Manual
DISCLAIMER
The AC & DC-coupled systems are transported, used and operated
under environmental and electrical conditions. Manufacturer has the
right not to provide after-sales services or assistance under following
conditions:
• Inverter is damaged during transfer.
• Inverter is out of warranty or any extended warranty if applicable.
• Inverter is installed, refitted or operated in improper ways without
authority from manufacturer.
• Inverter is installed or used under improper environment or
technical condition mentioned in this user manual, without
authority from manufacturer.
• Installation or configuration of the inverter does not follow
requirements mentioned in this user manual.
• The inverter is installed or operated against the requirements or
warnings that are mentioned in this user manual.
• Inverter is broken or damaged by any force majeure like lightening,
earthquake, fire hazard, storm and volcanic eruption etc.
• Inverter is disassembled, changed or updated on software or
hardware without authority from manufacturer.
• Inverter is installed, used or operated against any related items in
international or local policies or regulations.
• Any non-compatible batteries, loads or other devices connected to
the AC or DC-coupled system.
Note: Manufacturer will keep the right to explain all the contents in
this user manual. To insure NEMA Type 4X, inverter must be sealed
well, install the inverters within one day after unpacking, otherwise
seal all unused terminals / holes, unused terminals / holes are not
allowed to be kept open, confirm that there is no risk of water or dust
entering the terminals / holes.
Disclaimer
To Next Page
Loading...