24 Installation Manual
• Any part of this system shouldn't block the switch and breaker
from disconnecting the inverter from DC and AC power.
• Inverter should be installed on a solid surface, where it is suitable
for inverter's dimensions and weight .
• Ambient temperature should be lower than 45°C. (High ambient
temperature will cause power derating of inverter.)
• It is recommended that the installation of the inverter should
be prevented from direct sunlight, snow, rain and other negative
influences which may cause function impact or life aging.
Mounting System / Inverter
3.2.2. INVERTER
Selecting Mounting Location
Refer to the 'Clearances and Knockout Locations' section when
mounting and installing the inverter. The following considerations
must be taken into account before selecting where to install:
• Inverter should be installed vertically or lie on a slope by a max of
15°.
To Next Page
Loading...