20 Installation Manual
Mounting System
3.2. MOUNTING SYSTEM
REQUIRED TOOLS
Before installing the battery enclosures, make sure nothing inside the
package is damaged. Below are list of recommended tools you will
need to install the Electriq PowerPod 2:
PARTS NAME Size Description
Gloves
Automatic Screw Driver #1 & #2 Phillips
Wrench 17 mm Battery Enclosure Feet
Allen Wrench
4mm
Inverter Cover & battery
cover
Allen Wrench
3mm
Auto-transformer cover
Socket Nut Drive
1/2"
Lag Bolt Mounting
Bracket
Socket Nut Drive
10mm
Nuts for BMS, Batteries
& PE Wire
To Next Page
Loading...