51Installation Manual
Installing System / Inverter
3.3.5. INVERTER
Overload
PowerPod 2 series hybrid inverters are able to supply overload output
at its backup. For details refer to the technical specifications section.
Note, the inverter has self-protection derating at high ambient
temperatures
Overload Operation
Inverter will restart itself if overload protection happens. The
preparation time for restarting will be longer and longer (max one
hour) if overload protection repeats. Take the following steps to stop
the inverter from turning o from overload.
Reset Overload Protection
· Decrease backup load power within max limitation.
· On dashboard under setting press reset overload protection.
To Next Page
Loading...