25Installation Manual
Mounting System / Inverter
• Product label on inverter should be clearly visible after
installation. Do not damage the label.
• Do not install the inverter when it is snowing or raining. If you
have to, pay attention to the waterproof and moisture-proof of the
inverter and distribution box.
• Leave enough space around the inverter according to the below
figure for natural heat dissipation.
CAUTION. Inverter should be installed away from
combustible, explosive and strong electro-magnetic
materials.
The inverter is suitable for mounting on concrete or other
non-combustible surface only.
L’onduleur doit être installé loin des matériaux électro-
magnats combustibles, explosifs et forts.
L’onduleur est adapté au montage sur le béton ou toute
autre surface non combustible seulement
To Next Page
Loading...