Service Manual
9
Check the automatic stop of the machine
• Start the machine.
• Check if the micro switches are working properly:
The machine must stop if the door is opened.
Check the direction of rotation (only on machines with 3–phase power supply)
• Check that the direction of the fan wheel is correct.
If the direction is wrong, swop two of the three phases to the left on the connection terminal.
Check the heat
• Let the machine work for five minutes on a program with heat.
• Check that the heating is working by opening the door and feel if there is heat in the drum.
Ready to use
If all tests are OK the machine is now ready to be used.
If some of the tests failed, or deficiencies or errors are detected, please contact your local service organisation or
dealer.
The installer shall instruct the user on the operation of the appliance before leaving.
To Next Page
Loading...
