Electrolux T5190LE User Manual

Service Manual
Tumble dryer
T5190LE
Type N1190..
Original instructions
438 9167-00/EN
2017.02.09

Electrolux T5190LE Specifications

General

Type	Tumble Dryer
Capacity	8 kg
Heat source	Electric
Energy Rating	A++
Color	White
Dimensions (H x W x D)	850 mm x 600 mm x 600 mm

Summary

Symbols and Warnings

Technical Data and Drawings

2.2 Detailed Technical Specifications

Provides detailed specifications for the machine and heat pump.

Machine Presentation

Function Check

Sensors and Thermostats

5.1 Inlet Air Sensor (PT100)

Details the inlet air temperature sensor and its replacement.

5.2 Outlet Air Sensor (NTC)

Explains the outlet air temperature sensor's role and replacement.

Door System

6.1 Door Switch

Covers the door switch operation and replacement.

6.2 Reversing the Door

Instructions for changing the door's opening direction.

Filter Maintenance

7.1 Special Filter Replacement

Procedures for replacing the special filter.

Motor Service

8.1 Motor Replacement

Step-by-step guide for replacing the main drive motor.

Heat Pump Unit Service

9.1 Heat Pump Unit Overview

Introduces the heat pump unit and its components.

9.2 Heat Pump Function

Explains the heat pump's thermodynamic cycle and function.

9.4 Separating the Units

Procedures for disconnecting the dryer from the heat pump unit.

9.6 Removing the Heat Pump

Detailed steps for safely removing the heat pump unit.

9.8 Heat Pump Unit Door Replacement

Guide for replacing the heat pump unit door.

9.9 Fan Replacement

Instructions for replacing the fan motor in the heat pump.

9.10 Final Approval

Final checks and tests after heat pump servicing.

Drum Service

10.1 Drum Replacement

Step-by-step guide for replacing the entire drum.

10.2 Drum Bearing Replacement

Instructions for replacing the drum support bearings.

10.3 Drum Belt Replacement

Procedure for replacing the drive belt around the drum.

10.4 Rear Sealing Replacement

Guide for replacing the sealing at the rear of the drum.

Control Panel

11.1 Control System

Overview of the machine's electronic control system and CPU.

11.1.2 Control System Connections

Details the electrical connectors on the control system CPU.

11.1.3 Control System CPU Replacement

Step-by-step guide for replacing the control system CPU board.

Control Knob Service

11.2.1 Control Knob Replacement

Instructions for removing and replacing the main control knob.

I/O Modules

12.1 I/O Module Types

Explains the different I/O modules and their configuration.

12.2 I/O Module Replacement

Procedure for replacing I/O modules.

12.3 External Connections Type 2

Details external wiring for I/O module type 2.

12.4 Circuit Diagrams Type 2

Provides circuit diagrams for various functions of I/O module type 2.

Troubleshooting

13.1 General Troubleshooting

General advice and safety precautions for troubleshooting.

13.2 Error Code Overview

Categorization and display of machine error codes.

13.3 Error Code Descriptions

Detailed explanations for common error codes and their causes.

Routine Maintenance

14.1 RMC Graphite Collector Cleaning

Instructions for cleaning the RMC glide surface on the drum.

14.2 Drum Area and Air Intake Cleaning

Cleaning procedures for the drum area, air intake, fan housing, and motor.

14.4 Special Filter and Water Valve Service

Procedures for servicing the special filter and water valve.

14.6 Heat Pump Unit Internal Cleaning

Detailed instructions for cleaning the interior of the heat pump unit.