Elegoo Mars 5 - 3 D Printer Tech Specs

3D Printer Tech Specs
●System: EL3D-3.0.1
●Operation: 3.5-inch Resistive Touch Screen
●Slicer Software: Voxeldance Tango & CHITUBOX
●Connectivity: USB Interface
●Technology: MSLA Stereolithography
●Light Source: COB Light Source (wavelength 405nm)
●XY Resolution: 35*35μm (4098*2560)
●Z-axis Accuracy: 0.02mm
●Layer Thickness: 0.01-0.2mm
●Printing Speed: MAX 70mm/h
●Power Requirements: 100-240V 50/60Hz 24V 3A
●Dimension: 230mm(L)*230mm(W)*433.5mm(H)
●Build Volume: 143.43mm(L)*89.6mm(W)*150mm(H)
●Package Size: 530mm(L)*325mm(W)*295mm(H)
●Gross Weight: 8.6KG
●Net Weight: 6.6KG
Printing Parameter Hardware Specication
Printing Specication
08