31
English
Warning:
Once the Action button has been pressed, the blades will rotate and the
Axelero
TM
will be driven. As a result, any remaining chips in the chamber and
Axelero
TM
will be blown out.
For your information
When shredding at temperatures around freezing, maximum branch size of
branchy material is limited to 70 mm.
For your information:
Always shred at full throttle for the engine to produce its full power output.
Caution:
If the revolutions are too low, the coupling will not engage when the Action but-
ton is pushed. A safety message on the LCD screen will ask you to increase the
revolutions. Use the thrust lever.
Caution:
If the motor is not sufficiently warmed up, the motor revolutions may drop
dramatically as a result of the sudden strain when the coupling is engaged.
The Super Prof electronics will prevent the motor cutting out by automatically
disengaging the coupling and, after a fraction of a second, engaging it again in
order to overcome the inertia of the blade axle and discharge system.
To Next Page
Loading...
