19
SECTION 1: INTRODUCTION
1.3 Touchscreen and Operator Interface
Table 2: Main Function Icons (continued)
Icon Name Description
Start Timer Starts the sweat collection timer.
Emergency Cancel Cancels the iontophoresis process.
Stop Stops the sweat collection timer.
Stop Inactive
Indicates the Stop icon is inactive or has already been
pressed to stop the timer.
Exit Exits from a process.
Sufficient Sweat
Rate
Indicates that the sweat rate was sufficient (operator
selected).
Indeterminate
Sweat Rate
Indicates that the sweat rate was indeterminate (operator
selected). The sweat sample must be measured by another
means, such as a balance or scale.
Insufficient Sweat
Rate
Indicates that the sweat rate was not sufficient (operator
selected).
To Next Page
Loading...
Need help?
General