EasyManuals Logo

ELITechGroup MACRODUCT ADVANCED 3710 SYS User Manual

ELITechGroup MACRODUCT ADVANCED 3710 SYS
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
23
SECTION 1: INTRODUCTION
1.4 Macroduct Advanced Model 3710
Battery Charge Level Indicator
The Macroduct Advanced displays a battery indicator that shows the charge level of the battery
(green bar inside the battery icon). The higher the green bar, the greater the battery charge level.
When the battery charge level is low, the green bar turns to red, indicating the battery should be
recharged.
Electrodes
The high-grade stainless steel electrodes require only minimal maintenance. This consists of
cleaning the electrodes with isopropyl alcohol after each use so they will be ready for the next
procedure. It is recommended to buff them with the electrode cleaning pads (REF: SS-271) with
the use of each new Macroduct Advanced Supply Kit (REF: SS-268), or approximately every six
tests (See Section 5.2). Electrode cable assembly lead wires should be periodically inspected for
breaks or cracks in the insulation. If electrode wires, insulation, or the plastic electrode housing
exhibit cracks or breaks, the entire electrode cable assembly should be replaced.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELITechGroup MACRODUCT ADVANCED 3710 SYS and is the answer not in the manual?

ELITechGroup MACRODUCT ADVANCED 3710 SYS Specifications

General IconGeneral
BrandELITechGroup
ModelMACRODUCT ADVANCED 3710 SYS
CategoryPersonal Care Products
LanguageEnglish