30
SECTION 2: MACRODUCT ADVANCED SYSTEM SETUP
2.2 Charging the Battery
5. While charging, the amber LED within the power switch blinks, indicating that the battery
is charging. The LED continues to blink until the battery is fully charged.
6. When the battery is fully charged, the unblinking amber LED remains on.
7. Disconnect the battery charging power supply from the device. The Home screen displays.
Refer to Section 5.5, Batteries, Charging, and Calibration for additional information.
When connected to power, the iontophoresis related circuitry is disabled for safety purposes and
iontophoresis is not possible.
To Next Page
Loading...
Need help?
General