2
©2018 ELITechGroup Inc. All rights reserved.
Printed in the United States of America. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language (human or
computer) in any form, or by any means whatsoever, without the prior express written permission
of ELITechGroup Inc.
Webster Sweat Inducer™, Sweat-Chek™, and EasyDuct™ are trademarks of ELITechGroup Inc.
Wescor®, ChloroChek®, Chloridometer®, Pilogel® and Macroduct® are registered trademarks.
Other trade names used in this manual are trademarks of their respective owners, used here for
information only.
ELITechGroup Inc. makes no express or implied warranty regarding this manual, its quality,
performance, or appropriate use regarding any type of specific procedure. ELITechGroup Inc. may
modify this manual without notice and without implying any obligation or liability on the part of
the company.
Manufactured in the United States of America by:
ELITechGroup Inc.
370 West 1700 South
Logan, Utah 84321-8212 USA
The Notified Body number 2797 above signifies that British Standards Institute BSI has certified
the Production Quality Assurance System of ELITechGroup Inc., according to Annex V of the
Medical Device Directive 93/42/EEC (MDD). The scope of that certificate, CE 59518, is:
The manufacture of sweat analysis systems for cystic fibrosis; and sweat inducers (to obtain
samples for use in the subsequent laboratory diagnosis of cystic fibrosis).
This covers the Class IIa devices Macroduct Advanced Model 3710, Macroduct Model 3700, and
Nanoduct Model 1030. Together with the Declaration of Conformity issued by the manufacturer
according to Annex VII, this allows the CE marking of these devices. There are no accessories to
which the CE certificate or the BSI Notified Body Number 2797 applies.
Macroduct Advanced Sweat Collector patent number:
US9226730 B2
Also published as:
EP2973536A2, US20140276220, WO2014145904A2, WO2014145904A3
To Next Page
Loading...
Need help?
General