n
Adjusting Zoom
By rotating the zoom dial on the main unit, you can adjust the angle of the zoomed image.
n
Closing microscope mode
From the OSD, select [Microscope]
→ [Off].
• When using the document camera straight after using the microscope, set [Set] →
[Off] in the OSD.
•
When setting [Set]
→ [Off] in the OSD, [Image Mode] returns to the [Image Mode]
selected before changing to the microscope mode.
•
In Microscope Mode, the brightness does not change even if you press the
[BRIGHTNESS
]/[BRIGHTNESS
] button on the operating panel.
To Next Page
Loading...
