Elmo ST-600D - Page 15

Volume control
Balance control
o Insert the film leader into the thread slot
as indicated by the r ed arrow. The film
will automat i ca lly thread to the take-up reel
through the film gu id e.
CAUTION :
If the film fails to attach itse lf
to the tak e· up reel, reverse the'
main
contro l knob to the °b
F
position and then attach the
leader to the take·up reel
manually.
o Set the main control knob to the C1~ position
to turn the lamp ON. With this operation, the
auto-thread lever will release auto matical ly .
o Adjust the volume by turn ing the volume con-
trol knob. [Outside knob is balance contro l.
(Refer to page 5.) 1
Note: The replayed sound is inaudible if
the motor switch is set at other than
the Ck position.
13