Elmo ST-600D - Voltage Selection; Trouble-shooting Hints

Replacing Fuses
When replacing the fuse, be sure to unplug the power cord .
Exciter lamp fuse
Amplifier fuse
• Main Power Fuse
Turn the s lott ed head screw counterc lockwise
on the fuse box at the rear of the projector
and pull it out .
• Amplifier Fuse
& Exciter Lamp Fuse
There are two fuses beside the transformer.
The l eft one is for the exc it er l amp and
the right one for the amp lifier.
•
Don't use fuses other than those rated
at specified value.
•
Be sure to disconnect the power cord
before replacing fuses.
• Remove both screws to take off the rear
cover as shown.
35