Eltek BC2000 User Manual

40 Display Operation Manual BC2000 and JC2000 Controller ~ Doc. No. 2055882, Issue 5.1, June 2014
Parameter Description
Default
Setting
Value Range
Probes*
Probe (1-4)
Sets the behavior of the controller TEMP/AUX
ports.
If an Eltek temp probe is installed, the probe
port is automatically set to “T Probe”
Disabled
Disabled
T Probe
Aux N.O.
Aux N.C.
Dist N.O.
Dist N.C.
Display
Brightness Adjusts the brightness level 50% 0 – 100%
Beep Volume
Adjusts the volume of the beep (set to 0% to
silence the beep)
50% 0 – 100%
Timeout
The controller display logs out and goes into
screen saver mode if it is idle for this period of
time
20 mins 1 – 60 mins
Screen Saver Options for the screen saver behavior Glow
Glow
Bouncing Box
Volts & Amps
Heartbeat
Presets
Current
This feature restores factory values for all
parameters. All three presets have the same
settings for profile 01. Presets for custom
profiles may differ.
Preset A
Preset A
Preset B
Preset C
Login
Password
User Login
(view parameters only)
1001 0000 – 9999
Administrator Login
(modify parameters)
5001 0000 – 9999
*Requires controller TEMP/AUX connections be made for proper operation. Consult relevant sections
within this document for details.

Eltek BC2000 Specifications

General

Brand	Eltek
Model	BC2000
Category	Controller
Language	English