MES1000, MES2000 Ethernet Switches 175
gi0/15 Force Authorized Authorized* Disabled 3600 n/a
gi0/16 Force Authorized Authorized* Disabled 3600 n/a
More: <space>, Quit: q, One line: <return>
ď‚§ Show 802.1X state for 12 ethernet interface:
console# show dot1x interface gigabitethernet 1/0/12
802.1x is disabled
Admin Oper Reauth Reauth Username
Port Mode Mode Control Period
-------- ------------------ ------------- -------- ---------- -----------------
gi0/12 Force Authorized Authorized* Disabled 3600 n/a
* Port is down or not present
Quiet period: 60 Seconds
Tx period: 30 Seconds
Max req: 2
Supplicant timeout: 30 Seconds
Server timeout: 30 Seconds
Session Time (HH:MM:SS): 00:00:00
MAC Address:
Authentication Method: Remote
Termination Cause: Port re-initialize
Authenticator State Machine
State: INITIALIZE
Backend State Machine
State: INITIALIZE
Authentication success: 0
Authentication fails: 0
Table 5.202 Description of command execution results
Username for 802.1X usage. If the port is authorized, the current user name is
shown. If the port is not authorized, the last successfully authorized user name for
the port is shown.
The period, during which the switch will wait for the response to the request or EAP
identification from the client before re-sending the request.