AIRPLANE
FLIGHT
MANUAL
ABNORMAL
PROCEDURES
ANAC APPROVED 4-20
REVISION 3 code 01 Page 5
AFM-1912
FUEL CROSSFEED FAILURE
If fuel crossfeed is set to LOW 1 or LOW 2 and fuel quantity is being
equalized, set the fuel crossfeed to OFF when appropriate.
If fuel crossfeed is set to LOW 1 or LOW 2 and fuel quantity is not
being equalized:
If Fuel XFeed Ovrd button is available, push it in and use crossfeed
selector as required.
If Fuel XFeed Ovrd button is not available, set the fuel crossfeed to
OFF and use asymmetric thrust as required.
FUEL CROSSFEED OVERRIDE FAILURE
If fuel crossfeed is set to LOW 1 or LOW 2 and fuel quantity is being
equalized, set the fuel crossfeed to OFF when appropriate.
If fuel crossfeed is set to LOW 1 or LOW 2 and fuel quantity is not
being equalized, set the fuel crossfeed to OFF and use asymmetric
thrust as required.
To Next Page
Loading...
