AIRPLANE
FLIGHT
MANUAL
SUPPLEMENT 3
CAT II OPERATION
PERFORMANCE
The performance data required for Category II operations are
presented by basic CAFM output tables and must be calculated
previously.
Operational regulations may require additional CAFM landing distance
adjustment.
ENGINES
TLA FLAPS GEAR AIRSPEED
APPROACH
CLIMB
1 TOGA 2 UP
APPROACH
CLIMB
SPEED
LANDING
CLIMB
2 TOGA 5 DOWN V
REF 5
(1)
LANDING
2 IDLE 5 DOWN V
REF 5
(1)
NOTE: 1) The Landing Reference Speed (V
REF 5
)
for Category II
operations is the appropriate speed obtained from the
CAFM and differs from the V
REF5
used for Category I
operations.
DEMONSTRATED WIND COMPONENTS
For manual FD (Flight Director) approaches:
Crosswind................................................................ 16 kt
For coupled approaches:
Headwind................................................................. 37 kt
Tailwind ................................................................... 15 kt
Crosswind................................................................ 16 kt
These demonstrated values are not considered to be limiting.
AFM-1912
ANAC APPROVED S3-10
REVISION 11 code 01 Page 7
To Next Page
Loading...
