EMC INDUSTRIAL GROUP LTD Communications & Display
MW61A_IM_ALL_SV6.09d_en 40/47
Communications & Display
Comms port 1 – RS232
Q92511 COM1 baud rate (8 data, no parity, 2 stop) 8580 19200
Q92512 COM1&2 modbus address [1 to 30] 8592 30
Q92513 COM1 handshake enable [0=disable, 1=enable] 8584 0
Q92514 COM1 error rate 8810
Comms port 2 – RS485
Q92521 COM2 baud rate (8 data, no parity, 2 stop) 8590 230400
Q92522 COM1&2 modbus address [1 to 30] 8592 30
Q92523 COM2 error count 8812
Display
Display settings
Q925691 key function code 8512 0
Q925692 I/O slave address 8514 1
Q925693 disable beeper 8518 0
Q925694 comms latency 8510 0 mS
CompactCom
Q92571 reset CompactCom 8948 0
Information & Resets
Product Information
These settings can only be viewed, and show important features of the display.
Q92612 product serial number 8852
Q92613 software version number 8854
Q92614 CPU type 8858
Reset settings
Q92633 reset other settings (1= reset to defaults) 8954 0
Set to 1 to reset all user settings to the defaults.
Other display settings
Q97 language select 8618
Selects the language to use for the display.
To change the language in the identification line of the display (top line), reset the ‘system name de-
sign’. When at this setting, press Fn 1 to reset. (Q25541).
When a non-English language is selected, pressing the language key will toggle between the language
and English.
Q98 display brightness 8516
Adjusts the display brightness.
I/O Function Table
Input Functions (level sensitive Π)
0
no function/pulse input †
0 0 208
224
1 1 Ϯ
2 2 Ϯ
3 3 Ϯ
4 net mode 4 Ϯ
5 5 Ϯ
6 * 6 Ϯ
7 7 Ϯ
8 hold flowrate 8 Ϯ
9 9 Ϯ
10 10 Ϯ
11 11 Ϯ
12 timer enable 12 Ϯ
13 13 Ϯ
14 user bit 1 14 Ϯ
control1_internal
control1C
control1G
control1_inputs_aux
15 user bit 2 15 Ϯ
Control1
=
control1_inputs
or
15
or
223
or
239
or
To Next Page
Loading...