2
Reference Manual
00809-0200-4420, Rev HC
Section 1: Introduction
July 2015
Introduction
1.2 Using this manual
This manual will help to install, configure, operate, and maintain the Gateway.
Section 1: Introduction
This section introduces the product and describes what components may be found in the box. It
also includes details for services and support as well as return and disposal of the product.
Section 2: Configuration
This section describes how to connect to the Gateway for the first time and what settings should
be configured before placing it on a live control network. It is important to note that some
Gateways are used in stand-alone applications and do not reside on a network. In these cases, it
is still important to configure the items outlined in this section.
Section 3: Installation
This section describes how to properly mount the Gateway and make electrical connections,
including electrical wiring, grounding, and host system connections. This section also describes
how to mount the optional remote antenna.
Section 4: Commissioning
This section describes the installation and setup of the optional software included with the
Smart Wireless Gateway. This software will aid in secure host integration as well as wireless field
device configuration.
Section 5: Operation and Maintenance
This section describes how to connect the Gateway to a host system and integrate data
gathered from the field device network. It covers network architectures, security, and data
mapping.
Section 6: Troubleshooting
This section provides troubleshooting tips as well as information to contact technical support
over the phone or through email.
Section 7: Glossary
The glossary defines terms used throughout this manual or that appear in the web interface of
the Smart Wireless Gateway.
Appendices
The appendices provide additional and more specific information on a variety of subjects
including Specifications and Reference Data and Product Certifications.
To Next Page
Loading...
Need help?
General
