Reference Manual
00809-0200-4420, Rev HC
Appendix C: DeltaV Ready
July 2015
64
DeltaV Ready
C.3 Requirements
C.3.1 DeltaV
Version 10.3 or newer.
C.3.2 Smart Wireless Gateway
DeltaV Ready option (Data Protocol option 5). See “Ordering information” on page 57.
C.4 Mounting and connecting
Mount the DeltaV Ready Gateway in the same manner as a standard Gateway. (“Mounting” on
page 16). The Gateway should be mounted in a location that allows convenient access to the
DeltaV control network as well as the wireless field network.
Connect the Gateway’s primary Ethernet port (Ethernet 1) into the DeltaV primary control
network. If the dual Ethernet option (Physical Connection code 2) was ordered with the
Gateway, connect the secondary Ethernet port (Ethernet 2) into the DeltaV secondary control
network.
Figure C-1. Delta V Control Network Architecture
A. Pro+ Engineering Station
B. Primary Control Network
C. Secondary Control Network
D. Controller and I/O
E. Smart Wireless Gateway
To Next Page
Loading...
