11
Reference Manual
00809-0200-4420, Rev HC
Section 2: Configuration
July 2015
Configuration
To change the TCP/IP Network Settings:
1. Navigate to System Settings>Gateway>Ethernet Communication.
2. Select Specify an IP address (recommended).
3. Enter the following:
Hostname
Domain Name
IP Address
Netmask
Gateway
4. Click Save Changes.
5. When prompted, click Restart apps.
6. Click Yes to confirm restart.
7. Close the web browser.
Note
Once the IP Address of the Gateway has been changed, communications to the web interface
will be lost. Restart the web browser, then log back into the Gateway using the new IP address
and other TCP/IP network settings. The PC/laptop TCP/IP network settings may need to be
changed.
To Next Page
Loading...
