Emerson Bettis SCE300 - Optional Modules

9
Installation and Maintenance Instructions
MAN-02-04-99-0712-EN Rev. 1
February 2020
Machine Description
Section 2: Machine Description
2.6 Optional Modules
SCE300 actuators can be provided with several optional modules, as listed in the table
below. Refer to this table for possible combinations of available modules.
Table 2. Optional Module Selection Table
Order code
for standard
plugs
Order code
for metal
plugs
OM1 I/O
additional
module
OM3
local
interface
Bluetooth
component
OM9
PDP V0/V1
OM11
DeviceNet
OM13
3-wires
module
P1 Q1

PA QA
  
P6 Q6
 
P7 Q7
 
P3 Q3

5P 7P
 
6P 8P
  
5D 7D
 
6D 8D
  
PG QG

NOTE
1. Each optional module (OMx) will be provided with its own Installation and
Maintenance Instructions. All modules except OM13 are available for both 1-phase
and 3-phase voltage versions.
2. OM1 board is available with and without Bluetooth feature. OM9 and OM11 are both
available with Bluetooth feature; Bluetooth component is not available for
integration by local organizations as stand alone unit.
3. OM13 is only available for HV single phase 100-240 units.