Emerson Branson LPX - Front Panel Controls and Indicators; Figure 2.2 Front-Panel Controls

100-412-196 REV. 06 17
2.2 Front Panel Controls and Indicators
This section describes the controls that you use to operate the LPX Power Supply. These
controls allow for accuracy and repeatability of control settings. A detailed description of
how and when to use each front panel control, the valid formats for the data that you
enter, and the response you receive from the system when you use each of these controls
is provided in
Chapter 6: Operation.
The LPX Power Supply is equipped with a keypad and LCD on the front panel of the unit.
With the keypad, you can set functional modes of operation and input digital parameters.
Availability of the various functions depends on the mode or state of the system. If an
error condition exists, the Alarm icon will flash and the beeper will sound three times.
Some functions of the LPX Power Supply can be controlled through the external input
connector located on the rear of the unit. describes the back panel of the unit.
2.2.1 LPX Power Supply Front Panel
Figure 2.2 Front-Panel Controls