20 100-412-196 REV. 06
2.2.2 LCD Description
Table 2.2 LCD Icons
Reference Description
Numeric Display
Displays parameter settings, parameter values, register numbers,
register settings, and preset numbers.
Energy Mode Icon
Indicates the power supply is running in Energy mode. For more
information on setting up and running in Energy mode, 6.5.1 Energy Mode.
Time Mode Icon
Indicates the power supply is running in On Time mode. For more
information on setting up and running in Time mode, see 6.5.2 Time Mode.
Continuous Mode Icon
Indicates the power supply is running in Continuous mode. For more
information on setting up and running in Continuous mode, see 6.5.3
Continuous Mode.
Amplitude Icon
When blinking, indicates the value shown on the numeric display
corresponds to the amplitude setting.
Off Time Icon
When blinking, indicates the value shown on the numeric display
corresponds to the off time setting.
Visible only if available for the current weld mode.
Ground Detect Icon
When blinking, indicates the value shown on the numeric display
corresponds to the current weld mode scrub time setting.
Visible only if available for the current weld mode.
NOTICE
Ground Detect icon is only visible if installed.
Preset and Save Icons
Indicates the number shown on the numeric display corresponds to the
memory location where the current weld settings are to be saved. For
more information on saving and recalling weld presets see 6.6 Save/
Recall Weld Preset.
To Next Page
Loading...
