Emerson Branson LPX - Table 5.4 LPX Power Supply Converter Part Numbers; Table 5.5 Start Cable Part Numbers

100-412-196 REV. 06 35
5.2.5 Converter Part Numbers
*Bench Fixture used with wrench to facilitate tool removal/attachment.
**TW2 pinned, for use in automation.
5.2.6 Start Cable Part Numbers
Table 5.4 LPX Power Supply Converter Part Numbers
Converter Part Number Used With Tool Kit EDP Number
2CH1 101-135-127R
20:0.15:2CH
101-063-208R
Wrench only: 201-118-010
Bench Fixture*: 149-085-057
2CH2 101-135-128R
2CH3 101-135-129R
TW1 101-135-015R
TW2 101-135-016R
TW2** 159-023-313R
TW3 101-135-031R
402 101-135-014R
20:0.55.902
902R 101-135-048R
CR30 101-135-081R
30:0.55:2CR 101-063-636R
CH30 101-135-071R
CS30 159-135-110R
CP30 159-135-111R
4C 101-135-126R
40:0.15.4C
101-063-176R
KTJ 101-135-046R
KTR 101-135-045R
4TR (3-pin) 101-135-042R
40:0.15.4T
40:0.55.4T
4TH (SHV) 101-135-067R
4TP (SHV) 101-135-068R
Table 5.5 Start Cable Part Numbers
Start Cable Cable Length Part Number
J911
8' 101-240-020R
15' 101-240-015R
25' 101-240-010R
J913 25' 101-240-072R