Emerson Branson LPX - Back Panel Connections; Figure 2.3 Back Panel of LPX Power Supply; Table 2.3 Connections to the LPX Power Supply

22 100-412-196 REV. 06
2.3 Back Panel Connections
Figure 2.3 Back Panel of LPX Power Supply
Table 2.3 Connections to the LPX Power Supply
Item Name Function
1 Power Switch Turns the unit on/off.
2
IEC/C14 Power
Connector
To connect the power supply to a grounded
electrical power source using the provided
detachable line cord.
3 Fuse Holder Provides access to a replaceable protective fuse.
4 User I/O J2 Connector
Connects the power supply to a PLC controller
for remote control.
5
Ground Detect Terminal
(Optional)
Factory installed option used to detect contact
between the horn and an anvil which has been
isolated from ground.
6 3 pin RF Connector
Connects the power supply to the ultrasonic
converter.
1
2
3
6
5
4