Emerson Branson LPX - Table 6.11 Recalling a Weld Preset from Memory

100-412-196 REV. 06 65
NOTICE
Press the ESC key to exit the preset mode without saving the preset.
Table 6.11 Recalling a Weld Preset from Memory
Step Action Reference
1 Press the Recall Preset key while on the ready screen.
2
Preset and Recall icons and digits will appear on the LCD.
The digits under the Preset icon shows the Preset number.
Select the preset number using the Up/Down Arrow keys,
then press the Enter key.
NOTICE
Weld Mode icon will show the Weld Mode associated with
the displayed preset number while navigating to the desired
preset number.
3
This will recall the saved preset and return to the ready
screen with the selected preset value displayed.
NOTICE
Press the ESC key to exit the preset mode without recalling the preset.