Calibrating the meter (CAL)Figure 6-9:
The multi-point linearization (noPtS) can be used to linearize the display for non-linear
signals. For instructions on how to use this feature, see Multi-Point linearization (noPtS).
For instructions on how to program numeric values see Section 5.3.
1. Press the Up arrow button to scroll to the Calibration menu (CAL) and press Enter.
2. The meter displays noPtS. For a linear signal, press the Up arrow. For a non-linear
signal, refer to Section 6.8.4.
3. The meter displays CAL UNITS. Press Enter to select the input units/pulse. The menu
reads Fun iT.
Product advanced features
User manual 69
To Next Page
Loading...
