Emerson Dixell XV300K Series - 13 Operating Parameters Menu - Slave; Parameters Reading and Editing

1592016130 XV300K EN MASTER r1.1 16.06.2015
XV300K
17/26
13 OPERATING PARAMETERS MENU - SLAVE
The operating parameters menus can be accessed from any visualization of the state menu, by pressing together
the keys + (hold the key pressed and press the key ).
The menu windows include the menu name and the corresponding
[identifying code].
The second line of the display is dotted
 Press the key to enter the parameters of the visualized menu;
 Press the key to return to the state menu;
 Press the key to go to the next menu;
 Press the key to return to the previous menu.
13.1 PARAMETERS READING AND EDITING
The parameters windows display the name of the parameter, the
[identifying code] of the corresponding menu, the value of the parameter
and the unit of measure.
to go to the parameter below;
to go to the parameter above
To change the value of the parameter press , the arrow and the value of
the parameter in brackets mean that the system is in the parameter editing
mode, edit the value by pressing the following key :
to increase the value
to decrease the value
to save.
to return to the parameter
->20
V1
[IC]
%
SLAVE
20
V1
[IC]
%
SLAVE
-----------------------
[IC]
SLAVE
IMPO.SLAVE